Acryl Putty Super Fine

Acryl Putty Super Fine is a quick drying formula with a working time of 1.5 minutes and 15 minutes of drying.

15g package for exclusive use by pattern makers, its sale to children under 16 years is prohibited.

Shake well before use.

• Pasta fills small surface imperfections
• Easy working properties include good propagation capability
• Leaves smooth, quality edges
• Low shrinkage offers the best end results

This quick-drying formula, Acryl Putty Super Fine restores smooth surfaces by filling in small holes, scratches, chips and other minor defects in materials such as plastic, wood, resins and iron.

Our acrylic putty offers easy sanding, smooth spreading and low shrinkage. When the dough is completely dry, you will notice its low shrinkage rate and excellent adhesion to the surface. The repaired object will resist flaking and chipping. With the best results and with the least amount of work, our putty offers light and high quality properties, which means it's easy to smooth the edges to blend in with the surrounding surface. A good lightness will produce more satisfying results and will reduce sanding.

Instructions for use:

Do not apply when the ambient temperature is below 13ºC or above 43ºC.

Use in a well-ventilated area, away from sparks or flames. (Do not apply material below the waterline unless the coating is above.)

For best results, apply only to clean surfaces. (Use compressed air to remove any dust contamination).

Apply using a plastic or metal spreader by pressing the putty firmly into the imperfections; keep application thickness at 1/16" or less.

Apply in thin layers rather than a thick application. Allow to dry before sanding.

Re-clean the surface before priming or coating. (Follow paint manufacturer's recommendations for primer and coating).

Care:

• Keep out of the reach of children.
• Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke.
• Do not breathe vapors or dust
• Wear protective gloves.
• IF IN EYES: Rinse cautiously with water for several minutes. If you wear contact lenses, remove them if possible. continue rinsing

Description of first aid measures Inhalation:

Get the person to get some fresh air.

In case of indisposition, consult a doctor.

Skin contact: Wash off immediately with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms persist, get medical attention.

Eye contact: Immediately flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. Get medical help.

IF SWALLOWED: Rinse mouth. In case of indisposition, consult a doctor.